Rapid characterization of physical properties for the pharmaceutical pellet cores based on NIR spectroscopy and ensemble learning.

During the development of sustained-release pellets, the physical characteristics of the pellet cores can affect drug release in the preparation. The method based on near-infrared (NIR) spectroscopy and ensemble learning was proposed to swiftly assess the physical properties of the pellet cores. In the research, the potential of three algorithms, direct standardization (DS), partial least squares regression (PLSR) and generalized regression neural network (GRNN), was investigated and compared. The performance of the DS, PLSR and GRNN models were improved after applying bootstrap aggregating (Bagging) ensemble learning. And the Bagging-GRNN model showed the best predictive capacity. Except for inter-particle porosity, the mean absolute deviations of other 11 physical parameters were less than 1.0. Furthermore, the cosine coefficient values between the actual and predicted physical fingerprints was higher than 0.98 for 15 out of the 16 validation samples when using the Bagging-GRNN model. To reduce the model complexity, the 60 variables significantly correlated with angle of repose, particle size (D50) and roundness were utilized to develop the simplified Bagging-GRNN model. And the simplified model showed satisfactory predictive capacity. In summary, the developed ensemble modelling strategy based NIR spectra is a promising approach to rapidly characterize the physical properties of the pellet cores.

An evaluation of microcrystalline cellulose attributes affecting compaction-induced pellet coat damage through a multi-faceted analysis.

Pellet coat damage in multi-unit pellet system (MUPS) tablets has previously been studied and addressed with limited success. The effects of lactose filler material attributes on pellet coat damage have been relatively well-studied but a similar understanding of microcrystalline cellulose (MCC) is lacking notwithstanding its high cushioning potential. Hence, the relationships between MCC attributes and pellet coat damage were investigated. Single pellet in minitablets (SPIMs) were used to isolate pellet-filler effects and reveal the under-unexplored impact of risk factors found in MUPS tablets. MUPS tablets and SPIMs were prepared with various grades of MCC and pellets with an ethylcellulose or acrylic coat at various compaction pressures. Subsequently, the extent of pellet coat damage was determined by dissolution test and quantified using two indicators to differentiate the nature of the damage. A multi-faceted analytical approach incorporated linear regression, correlations and a classification and regression tree algorithm and evaluated how MCC attributes, such as flowability, particle size and plastic deformability, exert various influences on the extent of ethylcellulose and acrylic pellet coat damage. This analysis improved the understanding of the different mechanisms by which pellet coat damage to these two polymer types occurs which can help enhance future pellet coat damage mitigation strategies.

A top-down spectroscopic approach for correlating coating thickness distributions with the dissolution profiles of enterically coated pellets.

Pharmaceutical dosage forms such as tablets and capsules are often coated with a functional polymer to modify the drug release. To obtain the drug release profiles, ensure quality control and predict in-vivo performance, dissolution studies are performed. However, dissolution tests are time-consuming, sample destructive and do not readily allow for at-line or in-line characterization. Rapid assessment of functional coatings is essential for products where a single capsule is comprised of hundreds of functionally-coated pellets and the collective drug release kinetics of the entire capsule depends on contributions from each pellet. Here, single Raman measurements were used to evaluate the coating thickness distributions of a dosage form comprised of small, functionally-coated pellets in capsules. First, the composition and physicochemical properties of pellets were characterized by multivariate analysis assisted Raman mapping of pellet cross-sections. Second, a method of collecting single Raman spectrum with spectral contributions from the coating and API layers was developed and optimized to estimate the thickness of coatings. The coating thicknesses obtained from single Raman measurements of pellets in each capsule revealed thickness distributions that correlated with the dissolution profiles (capsules with one distribution had single stage release and capsules with two distributions had a two-stage release). Finally, an unsupervised multivariate analysis method was demonstrated as a rapid and efficient way to correlate dissolution profiles of enterically coated pellets. In summary, this study presents a non-destructive and rapid characterization method for assessing coating thickness and has the potential to be applied in process analytical technologies to ensure coating uniformity and predict product dissolution rate performance.

Synthetic biodegradable polyesters for implantable controlled-release devices.

INTRODUCTION: Implantable devices can be designed to release drugs to localized regions of tissue at sustained and reliable rates. Advances in polymer engineering have led to the design and development of drug-loaded implants with predictable, desirable release profiles. Biodegradable polyesters exhibit chemical, physical, and biological properties suitable for developing implants for pain management, cancer therapy, contraception, antiviral therapy, and other applications. AREAS COVERED: This article reviews the use of biodegradable polyesters for drug-loaded implants by discussing the properties of commonly used polymers, techniques for implant formulation and manufacturing, mechanisms of drug release, and clinical applications of implants as drug delivery devices. EXPERT OPINION: Drug delivery implants are unique systems for safe and sustained drug release, providing high bioavailability and low toxicity. Depending on the implant design and tissue site of deployment, implants can offer either localized or systemic drug release. Due to the long history of use of degradable polyesters in medical devices, polyester-based implants represent an important class of controlled release technologies. Further, polyester-based implants are the largest category of drug delivery implants to reach the point of testing in humans or approval for human use.

PLGA implants for controlled drug release: Impact of the diameter.

The aim of this study was to better understand the importance of the diameter of poly(lactic-co-glycolic acid) (PLGA)-based implants on system performance, in particular the control of drug release. Different types of ibuprofen-loaded implants were prepared by hot melt extrusion using a Leistritz Nano 16 twin-screw extruder. Drug release was measured in well agitated phosphate buffer pH7.4 bulk fluid and in agarose gels in Eppendorf tubes or transwell plates. Dynamic changes in the implants' dry & wet mass, volume, polymer molecular weight as well as inner & outer morphology were monitored using gravimetric analysis, optical macroscopy, gel permeation chromatography and scanning electron microscopy. The physical states of the drug and polymer were determined by DSC. Also pH changes in the release medium were investigated. Irrespective of the type of experimental set-up, the resulting absolute and relative drug release rates decreased with increasing implant diameter (0.7-2.8 mm). Bi-phasic drug release was observed in all cases from the monolithic solutions (ibuprofen was dissolved in the polymer): A zero order release phase was followed by a final, rapid drug release phase (accounting for 80-90% of the total drug dose). The decrease in the relative drug release rate with increasing system diameter can be explained by the increase in the diffusion pathway lengths to be overcome. Interestingly, also the onset of the final rapid drug release phase was delayed with increasing implant diameter. This can probably be attributed to the higher mechanical stability of thicker devices, offering more resistance to substantial entire system swelling.

Microchannel-embedded implantable device with fibrosis suppression for prolonged controlled drug delivery.

For the prolonged, controlled delivery of systemic drugs, we propose an implantable drug-delivery chip (DDC) embedded with pairs of a microchannel and drug-reservoir serving as a drug diffusion barrier and depot, respectively. We pursued a DDC for dual drugs: a main-purpose drug, diclofenac (DF), for systemic exposure, and an antifibrotic drug, tranilast (TR), for local delivery. Thus, the problematic fibrotic tissue formation around the implanted device could be diminished, thereby less hindrance in systemic exposure of DF released from the DDC. First, we separately prepared DDCs for DF or TR delivery, and sought to find a proper microchannel length for a rapid onset and sustained pattern of drug release, as well as the required drug dose. Then, two distinct DDCs for DF and TR delivery, respectively, were assembled to produce a Dual_DDC for the concurrent delivery of DF and TR. When the Dual_DDC was implanted in living rats, the DF concentration in blood plasma did not drop significantly in the later periods after implantation relative to that in the early periods before fibrotic tissue formation. When the Dual_DDC was implanted without TR, there was a significant decrease in the blood plasma DF concentration as the time elapsed after implantation. Biopsied tissues around the Dual_DDC exhibited a significant decrease in the fibrotic capsule thickness and collagen density relative to the Dual_DDC without TR, owing to the effect of the local, sustained release of the TR.

Pharmacodynamics and pharmacokinetics of PLGA-based doxorubicin-loaded implants for tumor therapy.

The traditional systemic chemotherapy through intravenous infusion of doxorubicin (DOX) has many side effects. The aim of this study was to develop a PLGA-based DOX-loaded implant and to evaluate the efficacy and drug metabolism distribution of the implant in intratumoral chemotherapy for osteosarcoma (OS). In this study, implants containing DOX, poly(d,l-lactide-co-glycolide), and polyethylene glycol 4000 were prepared by melt-molding method. Then, the antitumor activity and systemic drug distribution of the implants were tested in a K7M2 OS bearing mouse model. The scanning electron microscope images showed that DOX was uniformly dispersed in the polymer matrix. Both the in vitro and in vivo release profiles of implants are characterized by three-phase release. Implantation of DOX-loaded implants into tumors can inhibit tumor growth in a dose-dependent manner. The pharmacokinetic behavior shows that intratumor chemotherapy through implants has a much higher drug concentration in tumors than in normal tissues, which may be the reason for improving antitumor activity and reducing systemic side effects. In summary, the drug release of the implants prepared in this study is sustained and stable, which promotes long-term local accumulation of drugs in tumors, improves the efficacy of chemotherapy and has low toxicity to normal tissues.

Construction and performance of exendin-4-loaded chitosan-PLGA microspheres for enhancing implant osseointegration in type 2 diabetic rats.

The updating and optimization of drug delivery systems is critical for better in vivo behaviors of drugs, as well as for improving impaired implant osseointegration in diabetes. Numerous studies have reported the benefits of exendin-4 on diabetic bone, with the potential to enhance osseointegration in diabetes. To construct an appropriate sustained-release system of exendin-4 targeting implant osseointegration in diabetes, this study fabricated exendin-4-loaded microspheres using poly(lactic-co-glycolic acid) (PLGA) and chitosan. The morphology, size, encapsulation efficiency, and drug release behavior of microspheres were investigated. The bioactivity of drug-loaded microspheres on cell proliferation and osteogenic differentiation of diabetic BMSCs was investigated to examine the pharmacologic action of exendin-4 loaded into chitosan-PLGA microspheres. Further, the influence of microspheres on osseointegration was evaluated using type 2 diabetes mellitus (T2DM) rat implant model. After 4 weeks, the samples were evaluated by radiological and histological analysis. The results of in vitro experiments showed that the prepared exendin-4-loaded chitosan-PLGA microspheres have good properties as a drug delivery system, and the chitosan could improve the encapsulation efficiency and drug release of PLGA microspheres. In addition, exendin-4-loaded microspheres could enhance the proliferation and osteogenic differentiation of diabetic BMSCs. The results of in vivo experiments showed the exendin-4-loaded microspheres significantly improved the impaired osseointegration and bone formation around implants in T2DM rats without affecting blood glucose levels. Thus, the local application of exendin-4-loaded chitosan-PLGA microspheres might be a promising therapeutic strategy for improving the efficacy of dental implants in T2DM individuals.

Facile surface functional polyetheretherketone with antibacterial and immunoregulatory activities for enhanced regeneration toward bacterium-infected bone destruction.

Existing biologically inert or unmodified implants to treat infectious bone defects or osteomyelitis still cannot effectively solve bacterial infection and osseointegration. In this work, a simple co-deposition strategy was developed to modify porous polyetheretherketone (PEEK) with improved antibacterial activity and controllable immunoregulatory ability. After PEEK was treated by H2SO4 to obtain porous PEEK (SPEEK), the self-polymerization of dopamine was operated on SPEEK in the solution of dopamine and gentamicin sulfate (GS) to prepare polydopamine (pDA) and GS layer-modified SPEEK (labeled as SPEEK-pDA-GS). The morphology, surface property, and molecular structure of SPEEK-pDA-GS were investigated. Besides the antibacterial property of SPEEK-pDA-GS ascribed to the successful immobilization of GS, SPEEK-pDA-GS exhibited promoted osseointegration through the results of mineralization, alkaline phosphatase (ALP) levels and osteogenic gene expression. Furthermore, the evaluation of the cell proliferation suggested that SPEEK-pDA-GS possessed the biocompatibility and the immunoregulatory ability that induced macrophages to anti-inflammatory M2 phenotype. Using rat as model, in vivo results containing X-ray, µ-CT, immunohistochemistry, and pathological analysis showed the excellent healing effect of SPEEK-pDA-GS on bone defect with infection with biological safety. This work illustrates a new insight into the simple and effective modification of PEEK and other implants with antibacterial, immunoregulatory, and osseointegration abilities for clinical requirement.

Development of an anti-infective coating on the surface of intraosseous implants responsive to enzymes and bacteria.

BACKGROUND: Bacterial proliferation on the endosseous implants surface presents a new threat to the using of the bone implants. Unfortunately, there is no effective constructed antibacterial coating which is bacterial anti-adhesion substrate-independent or have long-term biofilm inhibition functions. METHODS: Drug release effect was tested in Chymotrypsin (CMS) solution and S. aureus. We used bacterial inhibition rate assays and protein leakage experiment to analyze the in vitro antibacterial effect of (Montmorillonite/Poly-L-lysine-Chlorhexidine)10 [(MMT/PLL-CHX)10] multilayer film. We used the CCK-8 assay to analyze the effect of (MMT/PLL-CHX)10 multilayer films on the growth and proliferation of rat osteoblasts. Rat orthopaedic implant-related infections model was constructed to test the antimicrobial activity effect of (MMT/PLL-CHX)10 multilayer films in vivo. RESULTS: In this study, the (MMT/PLL-CHX)10 multilayer films structure were progressively degraded and showed well concentration-dependent degradation characteristics following incubation with Staphylococcus aureus and CMS solution. Bacterial inhibition rate assays and protein leakage experiment showed high levels of bactericidal activity. While the CCK-8 analysis proved that the (MMT/PLL-CHX)10 multilayer films possess perfect biocompatibility. It is somewhat encouraging that in the in vivo antibacterial tests, the K-wires coated with (MMT/PLL-CHX)10 multilayer films showed lower infections incidence and inflammation than the unmodified group, and all parameters are close to SHAM group. CONCLUSION: (MMT/PLL-CHX)10 multilayer films provides a potential therapeutic method for orthopaedic implant-related infections.

A novel coating with universal adhesion and inflammation-responsive drug release functions to manipulate the osteoimmunomodulation of implants.

The immune response elicited by the bone endoprosthesis is currently considered an important factor that affects its interfacial osteointegration. In this work, a metal-phenolic-based drug-loaded coating with universal adhesion properties and intelligent drug delivery feature was created to promote osteointegration by manipulating a beneficial osteoimmune microenvironment. A novel pro-drug with inflammation-responsive release function was firstly synthesized via the esterification reaction between tannic acid (TA) and indometacin (IND), and then the coating was developed by chelating it with Fe3+. In the normal biological environment, the coating was stable, while, in the inflammatory environment, the release of TA and IND motifs could be triggered by the overexpressed esterase. The released TA and IND displayed synergistic effects on macrophage polarization, leading to a downregulation expression of pro-inflammatory cytokines, and an upregulation expression of anti-inflammatory cytokines and osteogenic-related factors. When stimulated by a conditioned medium generated by macrophages seeded onto the coating, the osteogenic differentiation potential of BMSCs was significantly enhanced. Finally, the designed coating significantly promoted the osteointegration of the implant, demonstrated by the increase of the bone-implant contact by two times. Additionally, the coating was substrate-independent and can be formed within seconds without special equipment, thus, it showed great potential applications to endow advanced hard tissue implants with favorable osteoimmunomodulation.

Accelerated in vitro release testing method for a long-acting peptide-PLGA formulation.

Poly (lactic-co-glycolic acid) (PLGA), a biocompatible and biodegradable polymer, is one of the most commonly used vehicles for controlled-release (CR) implantable dosage forms. Drug molecules formulated in such CR vehicles are released slowly over an extended period of time - often months to years - posing challenges for batch release and quality control testing. Thus, reliable and reproducible accelerated testing methods are required to bridge this gap during early formulation development. This work describes the development of an accelerated in vitro release testing method to predict the real-time in vitro release of a synthetic peptide from a 6-month CR PLGA implant formulation. While accelerated methods have been previously reported for PLGA-based formulations, this work describes a unique case of an aggregation-prone peptide, which required careful attention to the impact of different conditions on both release kinetics and peptide stability. This method describes a suitable combination of release conditions that could help in understanding the release profiles of such peptides prone to aggregation. Parameters including pH, buffer species, temperature, and addition of organic co-solvents and surfactants were evaluated separately and in combination for their ability to achieve complete peptide release within 2 weeks while accurately recapitulating release rate, profile and peptide stability. The accelerated release method that gave the best agreement with real-time release was a mixed media of co-solvent (5% tetrahydrofuran), surfactant (5% TritonX-100) and elevated temperature (50 °C) in a neutral buffer (PBS pH 7.4). This optimized accelerated release method achieved complete release of the peptide load within 14-21 days compared to 3- to 6-months of real-time release and could discriminate critical differences in release behavior between different CR formulations to guide formulation and process development.

Biosensitive and antibacterial coatings on metallic material for medical applications.

Metallic materials are commonly used for load-bearing implants and as internal fixation devices. It is customary to use austenitic stainless steel, especially surgical grade type 316L SS as temporary and Ti alloys as permanent implants. However, long-term, poor bonding with bone, corrosion, and release of metal ions, such as chromium and nickel occur. These ions are powerful allergens and carcinogens and their uncontrolled leaching may be avoided by surface coatings. Therefore, bioactive glasses (BGs) became a vital biomedical material, which can form a biologically active phase of hydroxycarbonate apatite on their surface when in contact with physiological fluids. To reduce the high coefficient of friction and the brittle nature of BGs, polymers are normally incorporated to avoid the high-temperature sintering/densification of ceramic-only coatings. For medical application, electrophoretic deposition (EPD) is now used for polymer (organic) and ceramic (inorganic) components at room temperature due to its simplicity, control of coating thickness and uniformity, low cost of equipment, ability to coat substrates of intricate shape and to supply thick films in composite form, high purity of deposits as well as no phase transformation during coating. Although extensive research has been conducted on polymer/inorganic composite coatings, only some studies have reported multifunctional properties, such as biological antibacterial activity, enhanced cell adhesion, controlled drug release ability, and mechanical properties. This review will focus on biodegradable coatings, including zien, chitosan, gelatin, cellulose loaded with antibacterial drugs/metallic ions/natural herbs on biostable substrates (PEEK/PMMA/PCL/PLLA layers), which have the potential of multifunctional coating for metallic implants.

Electrosprayed minocycline hydrochloride-loaded microsphere/SAIB hybrid depot for periodontitis treatment.

Minocycline hydrochloride (MINO) has been one of the most frequently used antibiotics in the treatment of periodontitis due to its antibacterial activity and osteogenesis effects; however, high levels of MINO administered during the treatment halt the formation of new bone. Therefore, the purpose of the present study was to prepare a MINO-microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot to reduce the burst release of MINO and ensure antibacterial and osteogenesis effects of MINO in the treatment of periodontitis. Uniform microspheres, approximately 5 µm size, with a slightly rough surface and different MINO loading (10, 12, and 14%) were prepared, and the microspheres were added into SAIB, after which the burst release significantly decreased from 66.18 to 2.92%, from 71.82 to 3.82%, and from 73.35 to 4.45%, respectively, and the release from all the MINO-microspheres/SAIB hybrid depots lasted for 77 days. In addition, cytotoxicity test showed that the MINO-microsphere with 12% drug loading promoted the proliferation of osteoblasts the most and was subsequently used in vivo experiments. Moreover, in the model of ligatured-induced periodontitis in SD rats, the MINO-microsphere/SAIB hybrid depot not only significantly increased the alveolar bone height and bone volume but also reduced the inflammation of the periodontal tissue. Additionally, it also inhibited the expression of the receptor activator of nuclear factor-kappa B ligand (RANKL) and promoted the expression of osteoprotegerin (OPG).. These results indicated that the MINO-microsphere/SAIB hybrid depot might be promising in the treatment of periodontitis.

Initial Leuprolide Acetate Release from Poly(d,l-lactide-co-glycolide) in Situ Forming Implants as Studied by Ultraviolet-Visible Imaging.

The initial drug release from in situ forming implants is affected by factors such as the physicochemical properties of the active pharmaceutical ingredient, the type of the excipients utilized, and the surrounding environment. The feasibility of UV-vis imaging for characterization of the initial behavior of poly(d,l-lactide-co-glycolide) (PLGA)/1-methyl-2-pyrrolidinone (NMP) in situ forming implants was investigated. The in vitro release of leuprolide acetate (LA) and implant formation in real time were monitored using dual-wavelength imaging at 280 and 525 nm, respectively, in matrices based on agarose gel and hyaluronic acid (HA) solution emulating the subcutaneous matrix. Three hours upon injection of the pre-formulation, approximately 15% of the total amount of LA administered was found in the agarose gel, while 5% was released from the implant into the HA solution. Concurrently, more extensive swelling of the implants in the HA solution as compared to implants in the agarose gel was observed. Transport of both LA and the solvent NMP was investigated using UV-vis imaging in a small-scale cell where the geometry of the formulation was controlled, showing a linear correlation between drug release and solvent escape. Light microscopy showed that the microstructures of the resulting implants in agarose gel and HA solution were different, which may be attributed to the different solvent exchange rates. UV imaging was also used to examine the interaction of LA with the release medium by characterizing the diffusion of LA in agarose gel, HA solution, and phosphate buffered saline. The reduced LA diffusivity in HA solution as compared to agarose gel and the LA distribution coefficient in the agarose gel-HA system indicated the presence of interactions between LA and HA. Our findings show that the external environment affects the solvent exchange kinetics for in situ forming implants in vitro, resulting in different types of initial release behavior. UV-vis imaging in combination with biorelevant matrices may offer an interesting approach in the development of in situ forming implant delivery systems.

Clinically established biodegradable long acting injectables: An industry perspective.

Long acting injectable formulations have been developed to sustain the action of drugs in the body over desired periods of time. These delivery platforms have been utilized for both systemic and local drug delivery applications. This review gives an overview of long acting injectable systems that are currently in clinical use. These products are categorized in three different groups: biodegradable polymeric systems, including microparticles and implants; micro and nanocrystal suspensions and oil-based formulations. Furthermore, the applications of these drug delivery platforms for the management of various chronic diseases are summarized. Finally, this review addresses industrial challenges regarding the development of long acting injectable formulations.

Lymphatic immunomodulation using engineered drug delivery systems for cancer immunotherapy.

Though immunotherapy has revolutionized the treatment of cancer to improve disease outcomes, an array of challenges remain that limit wider clinical success, including low rate of response and immune-related adverse events. Targeting immunomodulatory drugs to therapeutically relevant tissues offers a way to overcome these challenges by potentially enabling enhanced therapeutic efficacy and decreased incidence of side effects. Research highlighting the importance of lymphatic tissues in the response to immunotherapy has increased interest in the application of engineered drug delivery systems (DDSs) to enable specific targeting of immunomodulators to lymphatic tissues and cells that they house. To this end, a variety of DDS platforms have been developed that enable more efficient uptake into lymphatic vessels and lymph nodes to provide targeted modulation of the immune response to cancer. This can occur either by delivery of immunotherapeutics to lymphatics tissues or by direct modulation of the lymphatic vasculature itself due to their direct involvement in tumor immune processes. This review will highlight DDS platforms that, by enabling the activities of cancer vaccines, chemotherapeutics, immune checkpoint blockade (ICB) antibodies, and anti- or pro-lymphangiogenic factors to lymphatic tissues through directed delivery and controlled release, augment cancer immunotherapy.

Cortisol regulates insulin-like growth-factor binding protein (igfbp) gene expression in Atlantic salmon parr.

The growth hormone (Gh)/insulin-like growth-factor (Igf)/Igf binding protein (Igfbp) system regulates growth and osmoregulation in salmonid fishes, but how this system interacts with other endocrine systems is largely unknown. Given the well-documented consequences of mounting a glucocorticoid stress response on growth, we hypothesized that cortisol inhibits anabolic processes by modulating the expression of hepatic igfbp mRNAs. Atlantic salmon (Salmo salar) parr were implanted intraperitoneally with cortisol implants (0, 10, and 40 µg g-1 body weight) and sampled after 3 or 14 days. Cortisol elicited a dose-dependent reduction in specific growth rate (SGR) after 14 days. While plasma Gh and Igf1 levels were unchanged, hepatic igf1 mRNA was diminished and hepatic igfbp1b1 and -1b2 were stimulated by the high cortisol dose. Plasma Igf1 was positively correlated with SGR at 14 days. Hepatic gh receptor (ghr), igfbp1a, -2a, -2b1, and -2b2 levels were not impacted by cortisol. Muscle igf2, but not igf1 or ghr, levels were stimulated at 3 days by the high cortisol dose. As both cortisol and the Gh/Igf axis promote seawater (SW) tolerance, and particular igfbps respond to SW exposure, we also assessed whether cortisol coordinates the expression of branchial igfbps and genes associated with ion transport. Cortisol stimulated branchial igfbp5b2 levels in parallel with Na+/K+-ATPase (NKA) activity and nka-α1b, Na+/K+/2Cl--cotransporter 1 (nkcc1), and cystic fibrosis transmembrane regulator 1 (cftr1) mRNA levels. The collective results indicate that cortisol modulates the growth of juvenile salmon via the regulation of hepatic igfbp1s whereas no clear links between cortisol and branchial igfbps previously shown to be salinity-responsive could be established.

Solid Dispersion Pellets: An Efficient Pharmaceutical Approach to Enrich the Solubility and Dissolution Rate of Deferasirox.

Deferasirox (DFX) is an oral iron-chelating agent and classified into class II of the Biopharmaceutics Classification System. Low bioavailability of the drug due to insufficient solubility in physiological fluids is the main drawback of DFX. The idea of the current study was to explore the potential of solid dispersion (SD) as an effective method to improve the dissolution rate of DFX in pellets. The SDs were made by the solvent evaporation technique using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K25 with different drug-to-carrier ratios. Then, the dispersion was milled and mixed with other components and the mixture layered on sugar-based cores by pan coating technique. The pellets were evaluated in terms of size distribution, morphology (SEM), and dissolution behaviour. Drug-polymer interactions were studied using differential scanning calorimetry (DSC), X-ray diffraction study (XRD), and Fourier transformation infrared (FTIR) spectroscopy. The pellets coated with SD showed a remarkable rise in the solubility of DFX than that of free drug-loaded pellets. The dispersion with PVP K25 showed a faster dissolution rate as compared to other mixtures. The DSC and XRD analysis indicated that the drug was in the amorphous state when dispersed in the polymer. The FTIR studies demonstrated any ruled out interaction between drug and polymer. The SEM showed smoothness on the surface of the pellets. It is resolved that the SD method considerably enriched the dissolution rate of DFX in pellets, which can also be utilized for other poorly water-soluble drugs.